Platinum-vanities APS-596C User Manual Page 11

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 10
128-8803a
11 of 16
If the alarm system has been triggered, the
icon displayed on the transmitter LCD will in-
dicate which zone has been activated, as well
sound the beep tones, or vibrate dependent
upon the setting as shown above. The fol-
lowing trigger patterns will be displayed.
Triggered and the entry attempt was made to
one of the vehicle doors.
Triggered and entry attempt was made to the
vehicles hood or trunk.
Triggered and entry attempt was made to the
vehicles glass, or the vehicle has been hit or
bumped hard enough to cause a response
from the vibration detector.
ADDITIONAL ICONS THAT MAY BE DIS-
PLAYED ARE:
If the arm/disarm chirp tones have been
turned off at the vehicle, when you arm, or
disarm, the display will indicate this as shown
and there will be no arm/disarm chirps at the
transmitter. This is true if the transmitter is
set for vibrate mode.
When the vehicle is armed, and a door is
opened, or ajar, the transmitter will chirp 3
times, the lights will flash and then the dis-
play will flash as shown. When the door is
closed or the zone clears, the transmitter will
chirp 1 time, and the display will clear.
When the vehicle is armed and the hood or
trunk, is opened or ajar, the transmitter will
chirp 3 times, the lights will flash and then the
display will flash as shown. When the hood
or trunk is closed, or the zone clears, the trans-
mitter will chirp 1 time and the display will
clear.
11
Page view 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments